Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Dec 12, 2024 7:06 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Sat Jul 21, 2018 7:19 pm 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 992
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
Not for the first time, I made a bone nut today for a vintage Fender guitar, cursed Leo and wondered “why did he have this bright idea that a nut should have a curved bottom”? So, I went to Google and looked for an answer — came up empty.

Any one have any idea how this came about?


Sent from my iPad using Tapatalk


Top
 Profile  
 
PostPosted: Sat Jul 21, 2018 9:12 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2150
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I always assumed (you know thats a mistake) that they cut the nut slot after radiusing the f/b and whatever kind of router jig followed the radius. That's a pain for the nut but pretty nice if fret slots are the same depth all the way across. I believe that some of the after market necks have flat bottoms on the nut slots.


Top
 Profile  
 
PostPosted: Sun Jul 22, 2018 4:39 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
freeman got the reason correct, all slots cut after the board is radiused.

A quick easy way to make a nut with a bottom that fits perfectly is to place a piece of stick on sandpaper on the FB between the nut slot and 1st and use that to sand the bottom to shape. Takes but a few seconds.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
PostPosted: Sun Jul 22, 2018 10:10 am 
Offline
Koa
Koa
User avatar

Joined: Wed Jan 14, 2009 3:14 am
Posts: 992
Location: Shefford, Québec
First name: Tim
Last Name: Mullin
City: Shefford
State: QC
Zip/Postal Code: J2M 1R5
Country: Canada
Focus: Build
Status: Professional
Sure, I can see that machining a slot with curved bottom during shaping of the neck is straightforward, but making a flat bottom is hardly difficult, and surely would be easier than making tiny nuts with accurately matched bottoms.

My process has been to draw a radius on the thicknessed nut with an appropriate fret caul, rough out on my combo spindle sander, then finish on sandpaper over the FB. Not so quick that my mind doesn’t have time to ask ... why?


Sent from my iPad using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com